Fabrication Services
in Madurai

Yes, and we prefer it. Send GA drawings, part drawings or 3D models and we will fabricate to spec. Our DFM review will also flag anything that is expensive or impractical to make before you commit to production.

Straightforward fabricated items typically run 3 to 7 working days after drawing sign-off. Larger structures or work involving coating take longer - RG Tech commits to a dated schedule at order confirmation rather than a vague estimate.

Yes. RG Tech supports one-off prototypes as readily as production batches, which is how most customers start with us - a single trial part, then repeat production once it is proven.

Both, and they are the same unit. The laser is the first operation; bending, TIG and MIG welding, grinding and assembly happen in the same workshop in Ayanambakkam. You can engage us for cutting alone and take the blanks away, or for the finished fabricated component.

We fabricate from sheet and plate up to 45mm - base plates, brackets, gussets, frames, enclosures and guards. We are not a structural steel erector: we do not fabricate or erect beams, columns or trusses on site. If your drawing is plate work, it is ours; if it is structural sections, it is not.

That is most of what we do. Send a DXF, DWG, STEP, a PDF or a hand sketch with the material, thickness and quantity. We convert it to a cutting file, nest it, and send it back for your approval before anything is cut - so the first thing you see is what the machine will actually run.

RG Tech covers the full route after cutting: press-brake bending, TIG and MIG welding, grinding, drilling, tapping, assembly and surface finishing. You can hand over a drawing and collect a finished assembly rather than managing four separate vendors.

Yes. TIG is used where the weld is visible or the material is thin and heat distortion matters, MIG where speed and penetration matter on heavier structural work. We select the process to suit the joint, not the other way round.