Outdoor panels are deburred, primed and powder coated, or supplied in stainless where coating is not wanted. RG Tech will advise where a coating system is genuinely needed and where the material can be left bare.

Yes. Our 8000 x 2500 mm bed cuts large panels in a single piece, so a continuous pattern runs unbroken across the facade rather than being interrupted by weld lines — the usual giveaway on panels made from smaller sheets.

Cut-only panels typically ship in 3 to 5 working days after pattern approval. Panels needing framing and powder coating take 7 to 12 working days, since coating cure time cannot be shortened without hurting durability.

Jali panel pricing is driven by pattern density more than panel area — a fine, intricate pattern needs many times the cut length of an open one. RG Tech prices from your actual pattern file and panel size, quoted within 24 business hours.

For interior screens 1.5 mm to 3 mm is usually right. Exterior facade panels generally need 3 mm or more to stay flat and resist wind load. RG Tech advises on thickness once we see the pattern, span and fixing method.

Yes. Send your pattern as DXF, DWG or even a reference image and RG Tech will convert it to a cutting-ready vector. We check that the design has enough connected material to hold together once cut — many decorative patterns do not as drawn.

Mild steel for coated interior and exterior work, stainless steel 304 or 316 where corrosion resistance matters, aluminium where weight is a constraint, and copper or brass for feature pieces. RG Tech matches material to location and budget.

Yes. Panels can be supplied cut only, or fully finished with frames, mounting brackets and fixing points. Specifying the fixing method early matters — it changes the panel edge detail and the frame design.